To set a new profile, please do the steps listed below:
1. Open Object Setting>>Notification Object, and click the number (e.g., #1) under Index
column for configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name Type a name for such notification profile. The maximum
length of the name you can set is 15 characters.
Category Display the types that will be monitored.
Status Display the status for the category. You can check the box
you want to be monitored.
3. After finishing all the settings here, please click OK to save the configuration.
VII-1-12 String Object
VII-1-12 String Object
This page allows you to set several profiles of string object.
Click Add to open the following dialog.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
