4. Click OK.
5. Open LAN>>General Setup. If you want to let the clients in both groups communicate
with each other, simply activate Inter-LAN Routing by checking the box between
LAN1 and LAN2.
Vigor router supports up to six private IP subnets on LAN. Each can be independent
(isolated) or common (able to communicate with each other). This is ideal for
departmental or multi-occupancy applications.
Info As for the VLAN applications, refer to “Appendix I: VLAN Application
on Vigor Router” for more detailed information.
II-2-3 Bind IP to MAC
II-2-3 Bind IP to MAC
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
