Draytek Vigor2762 series User Manual

Web User Interface
Web User Interface
II-5-1 Dynamic DNS
II-5-1 Dynamic DNS
Enable the Function and Add a Dynamic DNS Account
Enable the Function and Add a Dynamic DNS Account
1. Assume you have a registered domain name from the DDNS provider, say
hostname.dyndns.org, and an account with username: test and password: test.
2. Open Applications>>Dynamic DNS.
3. Check Enable Dynamic DNS Setup.
Available settings are explained as follows:
Item Description
Enable Dynamic DNS
Setup
Check this box to enable DDNS function.
Set to Factory
Default
Clear all profiles and recover to factory settings.
View Log Display DDNS log status.
Force Update Force the router updates its information to DDNS server.
Auto-Update
interval
Set the time for the router to perform auto update for DDNS
service.
Index Click the number below Index to access into the setting
page of DDNS setup to set account(s).
Domain Name Display the domain name that you set on the setting page of
DDNS setup.
Active Display if this account is active or inactive.
4. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered
hostname: hostname and domain name suffix: dyndns.org in the Domain Name block.
The following two blocks should be typed your account Login Name: test and Password:
test.
Vigor2762 Series User’s Guide
140

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English