Send NTP Request
Through
Specify a WAN interface to send NTP request for time
synchronization.
Click OK to save these settings.
VI-1-9 SNMP
VI-1-9 SNMP
This page allows you to configure settings for SNMP and SNMPV3 services.
The SNMPv3 is more secure than SNMP through the encryption method (support AES and
DES) and authentication method (support MD5 and SHA) for the management needs.
Available settings are explained as follows:
Item Description
Enable SNMP Agent Check it to enable this function.
Get Community Set the name for getting community by typing a proper
character. The default setting is public.
Vigor2762 Series User’s Guide
To Next Page
Loading...
