Draytek Vigor2762 series User Manual

III-1-8 Station Control
III-1-8 Station Control
Station Control is used to specify the duration for the wireless client to connect and
reconnect Vigor router. If such function is not enabled, the wireless client can connect Vigor
router until the router shuts down.
Such feature is especially useful for free Wi-Fi service. For example, a coffee shop offers
free Wi-Fi service for its guests for one hour every day. Then, the connection time can be
set as “1 hour” and reconnection time can be set as “1 day”. Thus, the guest can finish his
job within one hour and will not occupy the wireless network for a long time.
Available settings are explained as follows:
Item Description
SSID Display the SSID that the wireless station will use it to
connect with Vigor router.
Enable Check the box to enable the station control function.
Connection Time /
Reconnection Time
Use the drop down list to choose the duration for the
wireless client connecting /reconnecting to Vigor router.
Or, type the duration manually when you choose User
defined.
Display All Station Control
List
All the wireless stations connecting to Vigor router by using
such SSID will be listed on Station Control List.
Hotspot Web Portal Click it to access into Hotspot Web Portal page for
modifying the settings if required.
After finishing all the settings here, please click OK to save the configuration.
Vigor2762 Series User’s Guide
184

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English