I-6 Quick Start Wizard
I-6 Quick Start Wizard
Quick Start Wizard can help you to deploy and use the router easily and quickly. Click
Wizards>>Quick Start Wizards. The first screen of Quick Start Wizard is entering login
password. After typing the password, please click Next.
On the next page as shown below, please select the WAN interface (WAN 1 to WAN3) that
you use. If DSL interface is used, please choose WAN1; if Ethernet interface is used, please
choose WAN2; if 3G/4G USB modem is used, please choose WAN3. For WAN2, choose Auto
negotiation as the physical type for your router.
WAN1~ WAN3 will bring up different configuration page. Refer to the following sections for
detailed information.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
