Application Notes
Application Notes
A-1 How can I get the files from USB storage device connecting to Vigor router?
A-1 How can I get the files from USB storage device connecting to Vigor router?
Files on USB storage device can be reviewed by opening USB Applicaiton>>File Explorer. If
it is necessary for you to delete, copy files on the device or write, paste files to the devcie,
it must be done through SMB server or FTP server.
SMB service is based on the original USB FTP service. You will need to setup USB FTP first.
We would like to give brief instructions on USB FTP setup here.
1. Plug the USB device to the USB port on the router. Open USB Application>>USB
Device Status. Make sure Disk Connected appears on the Connection Status as the
figure shown below:
2. Then, please open USB Application >> USB General Settings to enable SMB service.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
