VIII-2 Checking If the Hardware Status Is OK or Not
VIII-2 Checking If the Hardware Status Is OK or Not
Follow the steps below to verify the hardware status.
1. Check the power line and WLAN/LAN cable connections.
Refer to “I-2 Hardware Installation” for details.
2. Turn on the router. Make sure the ACT LED blink once per second and the
correspondent LAN LED is bright.
3. If not, it means that there is something wrong with the hardware status. Simply back
to “I-2 Hardware Installation” to execute the hardware installation again. And then,
try again.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
