Draytek Vigor2762 series User Manual

default, the first set of SSID will be enabled. You can hide it
for your necessity.
SSID Means the identification of the wireless LAN. SSID can be
any text numbers or various special characters.
Isolate Member –Check this box to make the wireless clients
(stations) with the same SSID not accessing for each other.
VPN – Check this box to make the wireless clients (stations)
with different VPN not accessing for each other.
Schedule Set the wireless LAN to work at certain time interval only.
You may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always
work.
After finishing all the settings here, please click OK to save the configuration.
III-1-3 Security
III-1-3 Security
This page allows you to set security with different modes for SSID 1, 2, 3 and 4 respectively.
After configuring the correct settings, please click OK to save and invoke it.
The password (PSK) of default security mode is provided and stated on the label pasted on
the bottom of the router. For the wireless client who wants to access into Internet through
such router, please input the default PSK value for connection.
By clicking the Security, a new web page will appear so that you could configure the
settings of WPA and WEP.
Vigor2762 Series User’s Guide
172

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English