Web User Interface
Web User Interface
IV-2-1 General Setup
IV-2-1 General Setup
This page determines the general configuration for SSL VPN Server and SSL Tunnel.
Available settings are explained as follows:
Item Description
Bind to WAN Choose and check WAN interface(s) for SSL VPN tunnel.
Port Such port is set for SSL VPN server. It will not affect the
HTTPS Port configuration set in System
Maintenance>>Management. In general, the default setting
is 443.
Server Certificate When the client does not set any certificate, default
certificate will be used for HTTPS and SSL VPN server. Choose
any one of the user-defined certificates from the drop down
list if users set several certificates previously. Otherwise,
choose Self-signed to use the router’s built-in default
certificate. The default certificate can be used in SSL VPN
server and HTTPS Web Proxy.
After finishing all the settings here, please click OK to save the configuration.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
