Version Display the firmware version used by the access point.
Password Vigor2762 can get related information of the access point by
accessing into the web user interface of the access point.
This button is used to modify the logging password of the
connected access point.
VI-
VI-
3
3
-2 WLAN Profile
-2 WLAN Profile
WLAN profile is used to apply to a selected access point. It is very convenient for the
administrator to configure the setting for access point without opening the web user
interface of the access point.
Click the number link of the selected profile to modify the content of the profile. Available
settings are explained as follows:
Item Description
Profile There are five WLAN profiles offered to be configured. Simply
click the index number link to open the modification page.
Name Display the name of the profile.
The default profile cannot be renamed.
Main SSID Display the SSID configured by such wireless profile.
Security Display the security mode selected by such wireless profile.
Multi-SSID Enable means multiple SSIDs (more than one) are active.
Disable means only SSID1 is active.
WLAN ACL Display the name of the access control list.
Rate Ctrl Display the upload and/or download transmission rate.
Clone It can copy settings from an existing WLAN profile to another
WLAN profile.
First, you have to check the box of the existing profile as the
original profile. Second, click Clone. The following dialog will
appear.
Third, choose the profile index to accept the settings from
the original profile. Forth, type a new name in the field of
Vigor2762 Series User’s Guide