Draytek Vigor2762 series User Manual

Web User Interface
Web User Interface
III-1-1 Wireless Wizard
III-1-1 Wireless Wizard
The wireless wizard allows you to configure settings specified for a host AP (for home use or
internal use for a company) and specified for a guest AP (for any wireless clients accessing
into Internet).
Follow the steps listed below:
1. Open Wizards>>Wireless Wizard.
2. The screen of wireless wizard will be shown as follows. This page will be used for
internal users in a company or your home.
Available settings are explained as follows:
Item Description
Name Type the SSID name of this router for wireless 2.4GHz. The
default name is defined with DrayTek. Change the name if
required.
Mode Available modes are different based on 2.4GHz and / or
5GHz supported by Vigor router.
Channel Means the channel of frequency of the wireless LAN. The
default channel is 6 (for 2.4GHz) or 36 (for 5GHz). You may
switch channel if the selected channel is under serious
interference. If you have no idea of choosing the frequency,
please select Auto to let system determine for you.
Vigor2762 Series User’s Guide
168

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English