V-2-5 DNS Filter Profile
V-2-5 DNS Filter Profile
The DNS Filter monitors DNS queries on UDP port 53 and will pass the DNS query information
to the WCF to help with categorizing HTTPS URL's.
DNS can be specified in LAN>>General Setup by using the server (e.g., 168.95.1.1) on
router or external DNS server (e.g., 8.8.8.8). If the router server is used, DNS Filter
General Setting will be applied to DNS query from clients on LAN. However, if the external
DNS server is used, DNS Filter Profile will be applied to DNS query coming from clients on
LAN.
Info For DNS filter must use the WCF service profile to filter the packets,
therefore WCF license must be activated first. Otherwise, DNS filter does
not have any effect on packets.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
