Draytek Vigor2762 series User Manual

Vigor2762
Vigor2762
Vigor2762n / Vigor2762ac
Vigor2762n / Vigor2762ac
Interface Description
Factory Reset
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press gently and hold
for more than 5 seconds. When the ACT LED blinks rapidly, release the
button. Then the router will restart with the factory default
configuration
WLAN
ON/OFF/WPS
Press for less than 2 seconds to switch toggle the router’s wireless
interfaces:
For example,
 2.4G (On) and 5G (On) – Default state.
 2.4G (Off) and 5G (On) – press and release the button
once.
 2.4G (On) and 5G (Off) – press and release the button
twice.
 2.4G (Off) and 5G (Off) – press and release the button
three times.
When WPS is enabled in the router’s web interface, press this button
for more than 2 seconds to enable WPS pairing mode.
USB1~USB2 Connector for a USB 3G/4G modem, storage, printer or USB
Thermometer
GigaLAN1~LAN4 RJ-45 Gigabit Ethernet connectors for local network devices.
GigaLAN4 can be configured as the Ethernet WAN port, see Section 5.3
for details
DSL
RJ-11 connector for ADSL or VDSL line
I / O
Power Switch. Turns the unit on (I) or off (O)
PWR Connector for the power adapter
Vigor2762 Series User’s Guide
4

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English