Available settings are explained as follows:
Item Description
Check to enable the
Filter Rule
Check this box to enable the filter rule.
Comments Enter filter set comments/description. Maximum length is
14- character long.
Index(1-15) Set PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules pre-
defined in Applications >> Schedule setup. The default
setting of this field is blank and the function will always
work.
Clear sessions when
schedule ON
Check this box to clear the sessions when the above
schedule profiles are applied.
Direction Set the direction of packet flow. It is for Data Filter only.
For the Call Filter, this setting is not available since Call
Filter is only applied to outgoing traffic.
Note: RT means routing domain for 2nd subnet or other
LAN.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
