Draytek Vigor2762 series User Manual

6. A dialog box will be popped up. Choose Range Address as Address Type by using the
drop down list. Type 192.168.1.10 in the field of Start IP, and type 192.168.1.20 in the
field of End IP. Then, click OK to save the settings. The computers within the range
can access into the Internet.
7. Now, check the content of Source IP is correct or not. The action for Filter shall be
set with Pass Immediately. Then, click OK to save the settings.
Vigor2762 Series User’s Guide
257

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English