To set a new profile, please do the steps listed below:
1. Click the number (e.g., #1) under Group column for configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Name Type a name for this profile. Maximum 15 characters are
allowed.
Available Service
Type Objects
All the available service objects that you have added on
Objects Setting>>Service Type Object will be shown in this
box.
Selected Service
Type Objects
Click >> button to add the selected IP objects in this box.
3. After finishing all the settings, please click OK to save the configuration.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
