109
2
PC Controller Setting
4
Programming a JOB for DC-646 Via Computer (PC Controller)
Click
NEXT
.
Check the contents of the function settings, then click
OK
.
Clicking
CANCEL
returns to the
WIZARD
screen without
changing the settings.
Check the JOB details.
To change the details, click the item and re-enter it.
REFERENCE
You can fi ne-adjust the setting positions of the JOB.
Up
: Each click on
Up
decreases values by 0.1 mm in
a vertical direction. (Upward)
Down
: Each click on
Down
increases values by 0.1
mm in a vertical direction. (Downward)
Left
: Each click on
Left
increases values by
0.1 mm in a horizontal direction. (To the left)
Right
: Each click on
Right
decreases values by 0.1
mm in a horizontal direction. (To the right)
To Next Page
Loading...
