Duplo DC-646 User Manual

131
2
PC Controller Setting
4
Programming a JOB for DC-646 Via Computer (PC Controller)
STACKER
Click the
STACKER
tab.
Batch Separation
OFF
: Starts processing documents without a time
interval.
Proceed to step 5.
Automatic
: Pausing is canceled according to the
set time and then the operation resumes
automatically. Even when the set time
has not elapsed, pressing the START key
resumes the operation.
Manual
: Press the START key to resume the operation.
Gap timing
If you have selected
Automatic
on the
Batch
Separation
screen in step 2, click the
up/down
icon to
set a recovery time from pausing.
Set it in the range of 1 sec to 30 sec.
Default is 5 sec.
End mark
If you have selected
Automatic
or
Manual
on the
Batch
Separation
screen in step 2,
End mark
setting appears.
If you select the
End mark
check box, processing is
executed with the interval set in
Batch Separation
between a document with end mark printed on it and the
next one.

Duplo DC-646 Specifications

General

Brand	Duplo
Model	DC-646
Category	Cutter
Language	English