Duplo DC-646 User Manual

67
2
Function Setting
Basic Operations
3
Gap timing
If you have selected
Automatic
on the
Batch separation
screen
in step 2, set a recovery time from pausing.
Use the CURSOR (Right/Left) key to set
Gap timing
. and press
the CURSOR (Down) key.
Gap timing
STACKER
5sec
*/**
(1-30)
You can set it in the range of 1 sec. to 30 sec.
Default is
5sec
.
Stacker
Batch separation
STACKER
OFF
*/**
Batch Separation
This selects a setting from the last process of the document preset
to the next one.
Use the CURSOR (Right/Left) key to select
Automatic
,
Manual
,
or
OFF
and press the CURSOR (Down) key.
End mark
Use the CURSOR (Right/Left) key to select
ON
or
OFF
, and
then press the CURSOR (Down) key.
ON
: Select
ON
when you use the
End mark
function.
Processing is executed with the interval set in
Batch
separation
between a document with end mark printed
on it and the next one.
OFF
: Select
OFF
when you do not use the
End mark
function.
End mark
STACKER
*/**
ON OFF
*/**
Automatic
: Pausing is canceled according to the set time and then the operation resumes
automatically. Even if the set time has not elapsed, pressing the START key
cancels batch separation and resumes the operation.
Manual
: Press the START key to cancel batch separation and resume the operation.
OFF
: Normal operation is performed.
Press the F key to display the
Select menu
screen.
Use the CURSOR (Up/Down) key to select
STACKER
and press
the SET key.
Settings2
Settings3
STACKER
Select menu
Stack priority
STACKER
Alignment
*/**
Stack priority
Set speed of a fi nished product to be ejected from the exit of the
machine to the
exit tray
.
Use the CURSOR (Right/Left) key to select
Alignment
or
Speed
.
Alignment
: Gives priority to alignment of fi nished products.
Decreases processing speed.
Speed
: Gives priority to processing speed. Reduces accuracy of
alignment of fi nished products.
Default is
Alignment
.

Duplo DC-646 Specifications

General

Brand	Duplo
Model	DC-646
Category	Cutter
Language	English