192
When a Document Jam Has Occurred
When a Document Jam Has Occurred
Put the waste box back in its place and close the
front
cover
.
IMPORTANT
Make sure to set the waste box properly
pushing it all the way in.
Press the STOP key to clear the error.
The machine is reset and the error message is
cleared.
If the document is longer than the length that was saved at JOB
entry, processing stops halfway and the document is ejected.
J12 DOCUMENT LENGTH
Check if the fi nished product ejected is correctly
processed.
If there are any fi nished products that are not
correctly processed, remove them.
Machine stopped
Document is too
long
J12-*
J12-*
Remove document
from exit
to clear