78
What is PC Controller?
Before Installation
●
WindowsInstaller is not installed in some operating systems and an error may occur
when the PC Controller is installed.
In this case, it is required to install the latest WindowsInstaller by downloading via
network, or install it by using the install program of WindowsInstaller in the PC
Controller install disk.
● How to install WindowsInstaller by using the PC Controller install disk.
1. Open
\Setup\WindowsInstaller3 1
folder.
2. Double-click
WindowsInstaller-KB893803-v2-x86.exe
.
3. Follow the instructions of the installer for installation.
IMPORTANT
Do not connect the computer and the DC-646 until the driver of the PC Controller is
installed.
PC Controller is a software used to program a JOB for the DC-646 on your computer.
Installation of this software enables the user to program and edit JOBs for the DC-646, with
preview image of the document, as well as save JOB data and execute a JOB from the
computer.
The following computer specifi cations are necessary to run the PC Controller.
Operating system
REFERENCE
• CPU: 1 GHz or faster
• Display resolution: 1200x768 pixel or more
• RAM: 1 GB or more
• Free hard-disk space: 500 MB or more
• Operating system: Windows 7 (32bit/64bit)
Windows 8.1 (32bit/64bit)
Windows 10 (32bit/64bit)
• Interface: USB 2.0 Full speed
• CD-ROM drive: (Used for installing the PC Controller)
• USB cable: Type AB, 3 m or shorter
To Next Page
Loading...
Need help?
General
