Duplo DC-646 - SETTING 2

To Next Page

To Previous Page

127

PC Controller Setting

Programming a JOB for DC-646 Via Computer (PC Controller)

Feeder Capacity

You can adjust the elevator height in three levels.

Select from the

Feeder Capacity

box.

Min

: for small amount of documents

Mid

Max

: for large amount of documents

Reject

This function ejects the double-fed documents and the

documents with a CCD reading error to the

reject

tray

Then, it continues to process the next document.

If error occurs three times continuously, processing

stops.

Select the

Reject

check box to enable this function.

Double Feed Detection

This function detects a double feed.

Select from the

Double Feed Detection

box.

Oﬀ

SETTING 2

Click the

SETTING 2

tab.

REFERENCE

Read Barcode

and

Reject

appear when these settings

are set to

enable

on the

OPTION MODULE

tab of the

MAINTENANCE

screen.

The

MAINTENANCE

setting screen is locked with the

password. To change the

MAINTENANCE

setting,

contact our service person.

REFERENCE

A document of 670 mm or longer is not ejected on the

reject tray

Main Page

Duplo DC-646 - SETTING 2

Table of Contents

Related product manuals