128
PC Controller Setting
Waste Full Detect Level
This function detects the waste strips amount in the
waste box
. When
waste box full
is detected, a
message appears on the screen.
Select from the
Waste Full Detect Level
box.
Mid
Max
Read Barcode
This sets whether to perform automatic setup by reading
the barcode.
OFF
: Does not read barcode.
Every sheet
: R reads barcode on every document and
sets a JOB.
First sheet Only
: R reads barcode on the fi rst
document and sets a JOB.
3 digit
(barcode)
When processing documents with 3-digit barcode
printed, select the
3 digit
check box.
REFERENCE
For detailed information, contact your dealer.
CPM off pos Adj (CPM (Cross Tool Module) off
position Adjustment)
(only when the
CPM (cross tool module (option))
is
installed.)
This adjusts processing end position of the tool of the
CPM (cross tool module (option))
.
Refer to the CPM (Cross Tool Module) Instruction
Manual.
CPM on pos Adj (CPM (Cross Tool Module) on
position Adjustment)
(only when the
CPM (cross tool module (option))
is
installed.)
This adjusts processing start position of the tool of the
CPM (cross tool module (option))
.
Refer to the CPM (Cross Tool Module) Instruction
Manual.
To Next Page
Loading...
