Duplo DC-646 - J7 CUT, CREASE

182
When a Document Jam Has Occurred
When a Document Jam Has Occurred
Press the STOP key to clear the error.
The machine is reset and the error message is
cleared.
J7 CUT, CREASE
A document jam has occurred in the
cutter module
or the
creaser module
.
Follow the procedure below to remove the jammed document.
Follow the procedure below as well if
CUTTER LOCK
or
CREASER LOCK
appears.
REFERENCE
Remove document
from cut/crease
area to clear
J7-*
Close the
top cover 2
and the
top cover 3
.
Tighten the fi xing screws (two of each) of the
modules in slot 3 and slot 4.
Slot 4 Slot 3