2
183
Troubleshooting
When a Document Jam Has Occurred
5
Press the JOG (Forth) key to eject the document.
IMPORTANT
Press the STOP key to clear the error.
The machine is reset and the error message is
cleared.
The JOG (Back) key is inactive when a
document remains inside of the machine.
If the jammed document cannot be removed by the procedure above, attempt to remove the
document according to the following procedure.
Open the
top cover 2
and the
top cover 3
.
Disconnect the connectors of the
creaser module
or the
cutter module
.
(The fi gure on the right shows a view from the
non-operator’s side;
● Left side connector:
Creaser module
● Right side connector:
Cutter module
)
To Next Page
Loading...
