Duplo DC-646 - When a Document Jam Has Occurred; J2 FEED TRAY

173
Troubleshooting
5
Press and hold down the
elevator down switch
to
lower the
feed tray
to the bottommost position.
When a document jam has occurred, messages appear and the error area fl ashes on the LCD
panel. Follow the procedure below to remove the jammed document.
Remove some documents so that the height of the
document stack does not exceed the
MAX
level.
J2 FEED TRAY
When a Document Jam Has Occurred
WARNING
• Do not touch the tool. Doing so may cause injury.
• Before removing the jammed document, make sure that the machine is fully stopped.
Use pliers to prevent your hands or fi ngers from being caught.
Too many documents are loaded on the
feed tray
.
Follow the procedure below to adjust the amount of
document to proper one.
Elevator down switch
Feed tray
overload
to clear
J2-*