137
2
PC Controller Setting
4
Programming a JOB for DC-646 Via Computer (PC Controller)
REFERENCE
REFERENCE
● Clicking
BACK
enables you to edit the items from the
last entering area to the fi rst entering area.
Right-click the fi eld to enter a correction value.
● Clicking
FUNCTION
displays the functions of the JOB.
When editing is completed, click
NEXT
.
The details of the JOB which is displayed in the upper
part of the main menu screen is displayed.
If you have programmed the JOB in the
WIZARD mode
,
the JOB data are displayed on the
WIZARD
screen.
The details of the JOB is displayed on the
DIRECT
screen.
● Clicking
BACK
returns to the previous screen.
If you have programmed a JOB in the
DIRECT mode
, the JOB data is displayed on the
DIRECT
screen. If you re-enter the data, which was programmed in the
WIZARD mode
, on
the
DIRECT
screen, it is also displayed on the
DIRECT
screen.
If you click
SETTING
and select the
Enable re-editing Wizard JOB data
check box on the
DEFAULT
tab, the JOB data is displayed on the
WIZARD
screen.
● Clicking
FUNCTION
displays the function settings for
the JOB.
(→ P.99 to P.110, steps 21 to 25 of WIZARD)
● Clicking
DOWNLOAD
savees the corrected JOB data in the DC-646.
(→ P.110, step 25 of WIZARD)
● To save the corrected JOB on the computer, click
SAVE
and then specify a file name and
location to save. (→ P.110, step 25 of WIZARD)
The message as shown on the right appears when the
settings (values, functions) are changed and not saved
or downloaded.
To return to the menu screen without saving or
downloading the data, click
OK
.
To save or download it, click
Cancel
.
To Next Page
Loading...
