139
2
PC Controller Setting
4
Programming a JOB for DC-646 Via Computer (PC Controller)
● Clicking
DOWNLOAD
saves the JOB data in the
DC-646.
1. Click
YES
.
Clicking
NO
returns to the previous screen without
saving it.
To save the JOB temporarily, check the
Temporary
job
box.
When the DC-646 is turned
OFF
or
another JOB is
retrieved, the temporarily saved JOB is deleted.
REFERENCE
2. To overwrite the locked JOB, click
YES
.
Clicking
NO
returns to the previous screen without
downloading it.
3. Download is completed.
Click
OK
.
REFERENCE
REFERENCE
• If you have programmed the JOB in th
e DIRECT mode
, the JOB data is displayed on the
DIRECT
screen.
If you re-enter the data, which was programmed in th
e WIZARD mode
, on the
DIRECT
screen, it is also displayed on the
DIRECT
screen.
• The message as shown on the right appears when
the settings (values, functions) are changed and not
saved or downloaded.
To return to the menu screen without saving or
downloading the data, click
OK
.
To save or download it, click
Cancel
.
If you download the data to the locked JOB, the
message as shown on the right appears.
To overwrite the locked JOB, unlock the locked JOB
fi rst.
(→P.98 Unlocking a JOB)
To Next Page
Loading...
Need help?
General
