Duplo DC-646 User Manual

2
159
Troubleshooting
When Messages Appear on the OK Monitor
5
Message Countermeasure
A document remains in slot 1 or slot 2.
There is a document jam in slot 1 or slot 2.
Remove the document from slot 1 or slot 2 and then
press the STOP key.
(→P.177 J5 MSM/SLOT2)
A document remains in slot 3 or slot 4.
There is a document jam in slot 3 or slot 4.
Remove the document from slot 3 or slot 4 and then
press the STOP key.
(→P.180 J6 SLOT3/4)
A document remains in the gutter area, cut or
crease area.
There is a document jam in the gutter area, cut or
crease area.
Remove the document from the gutter area, cut or
crease area and then press the STOP key.
(→P.182 J7 CUT, CREASE)
A document remains in the document exit area.
There is a document jam in the document exit area.
Remove the document from the document exit area
and then press the STOP key.
(→P.185 J8 EXIT TRAY)
A document remains in the margin cut area or the
gutter area.
There is a document jam in the margin cut area or
the gutter area.
Remove the document from the margin cut area or
the gutter area and then press the STOP key.
(→P.191 J11 WASTE BOX)

Duplo DC-646 Specifications

General

Brand	Duplo
Model	DC-646
Category	Cutter
Language	English