72
Processing a JOB with a Barcode
The fi nished products are ejected to the
exit tray
.
By pressing the START key, the built-in CCD reads the barcoded JOB number, then starts
processing the suitable JOB.
Set
Read Barcode
to
ON
in
Settings2
.
(→P.63 Function Setting 2)
IMPORTANT
IMPORTANT
REG BC - - - - -
001: ********
Sheets
999/999
Make sure that
BC
is displayed on the standby screen
after setting is completed.
Slit waste accumulates in the
waste box
. Open the
front cover
and remove
them periodically. Accumulation of waste may cause a document jam.
Side guide
Back guide
Attach the
back guide
(for the
exit tray
) and the
two
side guides
(for the
exit tray
).
Set the
back guide
(for the
exit tray
) perpendicular
to the fl oor.
To Next Page
Loading...
