Duplo DUPRINTER DP-460e - Page 50

40
Book Shadow Eraser Mode
2
Open the Panel cover.
s
How to Set Book Shadow Eraser Mode
Pressing (CANCEL) key redisplays the main screen.
3
Press (BOOK SHADOW ERASER) key.
A list of the shadow erasure is displayed on the
LCD panel.
4
Press“CURSOR”keys to select one item.
Each press of “CURSOR” keys moves to a different
item that is displayed highlighted.
8
Start platemaking and printing.
Proceed with steps
6 to 9 of the sequence
described in “ Basic Printmaking”.
“ Basic Printmaking”
a see p.14
1
Proceed with steps 1 to 5 of the sequence
described in “ Basic Printmaking”.
Place the documents on the are platen glass.
“ Basic Printmaking”
a see p.14
5
Press (OK) key.
The item selected in step
4 is set.
¡
When selecting “SPECIFY AREA”
a
page 41
OFF
CENTER
OUTLINE
CENTER & OUTLINE
SPECIFY AREA
SELECT AN ITEM WITH
AND PRESS
SHADOW ERASURE
w
q
¡
If you reset to Standard (off)
Use one of the following methods.
•
Press the ( BOOK SHADOW ERASER ) key,
then “CURSOR” keys.
Select “ OFF ” and press
(OK) key. If the initial setting is changed, the
image mode returns to the one you set.
•
Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode.
“ Standard mode” a see p.10
t
Select
y
Set
READY
0 SHT
1 SET
Shadow erasure icon appears.
e
Select
r
Set
AUTO
A3
B4
A 4 R
B 5 R
A 5 R
POST
MENT SIZE
R
ESS
AUTO
11 X 17
LG
LT R
ST
R
MAX
POST
MENT SIZE
R
ESS
¡
European
¡
U.S.
6
Press“CURSOR”keys to select document size.
Each press of
“CURSOR” keys moves to a different
item that is displayed highlighted.
7
Press (OK) key.
The item selected in step
6 is set.