Safety (Optional)
ICC424HF-CN1EN2.pdf2012-11-23
Safety (Optional)
Air conditioning
The system contains pressurized refrigerant. It is
forbidden to release refrigerants into the
atmosphere.
The system contains pressurized refrigerant. It is
forbidden to release refrigerants into the
atmosphere.
Fig. Air conditioning (ACC)
Work on the refrigerant circuit is only to be carried
out by authorized companies.
Work on the refrigerant circuit is only to be carried
out by authorized companies.
The cooling system is pressurized. Incorrect
handling can result in serious personal injury. Do
not disconnect or undo the hose couplings.
The cooling system is pressurized. Incorrect
handling can result in serious personal injury. Do
not disconnect or undo the hose couplings.
The system must be re-filled with an approved
refrigerant by authorized personnel when
necessary. See decal on or in the vicinity of the
installation.
The system must be re-filled with an approved
refrigerant by authorized personnel when
necessary. See decal on or in the vicinity of the
installation.
Edge cutter/compactor
Fig. Edge cutter/compactor
1. Transport position
2. Operating position
3. Holder for cutter/compactor wheel.
3
1
2
The operator must make sure that nobody is in the
area of operation while the machine is in use.
The operator must make sure that nobody is in the
area of operation while the machine is in use.
The edge cutter consists of rotating components
and there is a risk of being crushed.
The edge cutter consists of rotating components
and there is a risk of being crushed.
The tool must be returned to the transport
position (raised position) (1) every time it has
been used.
The tool must be returned to the transport
position (raised position) (1) every time it has
been used.
If the edge cutter and its parts are dismantled,
make sure that it is set in a relieved position and
resting on the ground.
If the edge cutter and its parts are dismantled,
make sure that it is set in a relieved position and
resting on the ground.
7
To Next Page
Loading...
