Machine description
ICC424HF-CN1EN2.pdf2012-11-23
"MACHINE SETTINGS"
The selection "Sprinkler Pump: 1 & 2" is in machine
settings.
If the machine is fitted with double sprinkler pumps
(Option) this is the menu in which the selection is
made for which of the sprinkler pumps are to be
activated to water the drum(s).
If the machine is fitted with accessories, e.g. a Chip
spreader, the settings for these can also be changed.
"WORKMODE SETTINGS"
This section is protected by Pin Code
There are 3 different modes that can be seleted in the
machine's workmode. (Soft, Medium, Hard).
The machine alerts at startup when the setting is in
Soft Mode.
"SERVICE MENU"
The service menu is also accessible via the main
menu for adjustments.
35
To Next Page
Loading...
