Dynapac CC424HF - Machine Description; Identification; Product Identification Number on the Frame; Machine Plate

Machine description
ICC424HF-CN1EN2.pdf2012-11-23
Machine description
Identification
Product identification number on the frame
1
Fig. PIN Front frame
The machine PIN (Product Identification Number) (1)
is punched on the right edge of the front frame.
Machine plate
1
Fig. Operator platform
1. Machine plate
The machine type plate (1) is attached to the front left
side of the frame, beside the steering joint.
The plate specifies among other things the
manufacturers name and address, the type of
machine, the PIN, Product Identification Number
(serial number), operating weight, engine power and
year of manufacture. (In some cases there are no CE
marking.)
Please state the machine's PIN when ordering
spares.
19