Maintenance - Maintenance schedule
ICC424HF-CN1EN2.pdf 2012-11-23
General
Periodic maintenance should be carried out after the
number of hours specified. Use the daily, weekly etc.
periods where number of hours cannot be used.
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply.
The manufacturer’s instructions found in the
engine manual also apply.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig
Action CommentPos.
in fig
Action Comment
Before starting up for the first time on that dayBefore starting up for the first time on that day
1 Check the engine oil level Refer to the engine manual1 Check the engine oil level Refer to the engine manual
9 Check the engine coolant level9 Check the engine coolant level
5 Check the hydraulic reservoir level5 Check the hydraulic reservoir level
11 Refuel11 Refuel
13 Fill the water tanks13 Fill the water tanks
14 Check the sprinkler system14 Check the sprinkler system
14 Check the Emergency watering (Extra pump in pump
system)
14 Check the Emergency watering (Extra pump in pump
system)
12 Check the scraper setting12 Check the scraper setting
After the FIRST 50 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig
Action CommentPos.
in fig
Action Comment
1,2 Change the engine oil and oil filter Refer to the engine manual1,2 Change the engine oil and oil filter Refer to the engine manual
3 Change the fuel filter Refer to the engine manual3 Change the fuel filter Refer to the engine manual
4 Change the hydraulic fluid filter Refer to 1000h.4 Change the hydraulic fluid filter Refer to 1000h.
15 Change the oil in the drum gears Refer to 1000h.15 Change the oil in the drum gears Refer to 1000h.
74
To Next Page
Loading...
