EasyManua.ls Logo

Dynapac CC424HF - Coolant Level - Check; Fuel Tank - Refueling

Dynapac CC424HF
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance, 10h
ICC424HF-CN1EN2.pdf 2012-11-23
Coolant level - Check
1
2
Fig. Expansion tank
1. Filler cap
2. Level marks
Check that the coolant level is between the max. and
min. marks (2).
Observe great caution if the cap has to be opened
while the engine is hot. Wear protective gloves and
goggles.
Observe great caution if the cap has to be opened
while the engine is hot. Wear protective gloves and
goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specification in these instructions
and the engine manual.
Flush the system every other year and change
the coolant. Also check that the air has
unobstructed passage through the reservoir.
Flush the system every other year and change
the coolant. Also check that the air has
unobstructed passage through the reservoir.
Fuel tank - Refueling
Fig. Fuel tank
1. Tank cap
2. Filler pipe
1
2
Never refuel while the engine is running. Do not
smoke and avoid spilling fuel.
Never refuel while the engine is running. Do not
smoke and avoid spilling fuel.
The filler pipe and tank cap are on the left side of the
front frame.
Refuel the tank every day before starting work, or fill
the tank at end of work. Unscrew the lockable tank cap
(1) and fill fuel up to the lower edge of the filler pipe.
The tank holds 230 liters (60.7 gal) of fuel. Refer to the
engine manual for information on diesel grade.
78

Table of Contents

Related product manuals