Dynapac CC424HF - Every 1000 Hours of Operation (Every Six Months); Every 2000 Hours of Operation (Yearly)

Maintenance - Maintenance schedule
ICC424HF-CN1EN2.pdf 2012-11-23
Every 1000 hours of operation (Every six
months)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig
Action CommentPos.
in fig
Action Comment
Check engine valve clearances Refer to the engine manualCheck engine valve clearances Refer to the engine manual
Check the engine belt drive system Refer to the engine manualCheck the engine belt drive system Refer to the engine manual
10 Replace the air cleaner's main filter and backup filter.10 Replace the air cleaner's main filter and backup filter.
4 Change the hydraulic fluid filter4 Change the hydraulic fluid filter
16 Change the oil in the drums16 Change the oil in the drums
15 Change the oil in the drum gears15 Change the oil in the drum gears
22 Replace the air cleaner filter in the cab22 Replace the air cleaner filter in the cab
Every 2000 hours of operation (Yearly)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig
Action CommentPos.
in fig
Action Comment
6 Change the hydraulic fluid6 Change the hydraulic fluid
11 Drain and clean the fuel tank11 Drain and clean the fuel tank
13 Drain and clean the water tanks13 Drain and clean the water tanks
17 Check the condition of the articulation17 Check the condition of the articulation
23 Overhaul the air conditioning Optional23 Overhaul the air conditioning Optional
76