Modem Configuration
GSM Config (continued)
New password: This field is used to change the system password.
Repeat password: This field is used for confirming the system password to prevent
incorrect entries.
Password protection: This switch determines the protection level of web pages. If the
"Settings page" option is set, then the WiFi / Cellular subsystem router
will only ask for a password when entering the settings page. On the
other hand, if the "All pages" option is selected, then all the tabs of the
WiFi / Cellular subsystem web interface will be password protected.
Language: This multiple choice switch is used to select the output language of
the WebUI.
Reset device: The "System reset" button reboots the WiFi / Cellular subsystem router,
while the "Factory reset" button resets the WiFi / Cellular subsystem to
the factory-programmed values.
Web page FTP access: The switch enables or disables the FTP access to the Web page files. The
customer is allowed to personalize the aspect of the WebUI. The WebUI
aspect may be reverted via AT command.
Programming
Page 84 March 2021HYB-UM-03155-EN-03
To Next Page
Loading...
Need help?
General
