Connections required on site
WARNING!
Danger due to improperly installed system components
Improperly installed system components can result in personal injury and
damage to the system.
– Check that the system components provided (pipe joints, flanges) have
been installed correctly
.
– If assembly has not been performed by Customer Service or another
authorised party, check that all system components are made of the correct
materials and meet the requirements.
NOTICE!
Non-compliance with operating conditions risks damage to components
The station may only be operated within the specified operating conditions.
This applies especially to ambient and media temperatures.
Ä
Chapter
11 ‘Technical data’ on page 95
Before installation, the supply connections needed on site must be provided.
Ä
Chapter
11 ‘Technical data’ on page 95 .
Assembly and connection
33 Ver. 08-04.2024
To Next Page
Loading...
