Eldes ESIM384 - Page 142

142
142
EN
ESIM384 Installation and Conguration Manual v1.1
EKB3/
EKB3W/
EWKB4
Enter parameter 24, event number and parameter status value:
24 01 0 # – Burglary alarm/restore
24 02 0 # – Mains power loss/restore
24 03 0 # – Armed/disarmed by user
24 04 0 # – Test event
24 05 0 # – Battery failed
24 06 0 # –Battery dead or missing/battery connection restore
24 07 0 # –Tamper alarm/restore
24 08 0 # –Instant Silent zone alarm/restore
24 09 0 # – Kronos ping
24 10 0 # – System started
24 13 0 # – 24-Hour zone alarm/restore
24 14 0 # – Fire zone alarm/restore
24 15 0 # – Low battery
24 16 0 # –Temperature risen
24 17 0 # – Temperature fallen
24 18 0 # – Wireless signal loss/restore
24 19 0 # – Disarmed by user (Duress code)
24 20 0 # – SGS code entered
24 21 0 # – Armed by user (partial arm)
24 22 0 # – Siren fail/restore
24 23 0 # –RF jammer detected/RF jamming stopped
24 24 0 # –Date/time not set
24 25 0 # – GSM connection failed
24 26 0 # – GSM/GPRS antenna fail/restore
24 27 0 # – System shutdown
24 28 0 #– Communication bus fail/restore
24 29 0 # – IP connection failed
24 31 0 # – Zone bypassed/activated
24 32 0 # – CO sensor lifetime exceeded
24 33 0 # – CO level critical
24 34 0 # – Report/Control zone triggered/restored
24 35 0 # – Armed/disarmed in STAY mode
24 36 0 # – Conguration via remote connection started
24 37 0 # – Panic/Silent zone alarm/restore
24 38 0 # – Armed/disarmed automatically
24 39 0 # – SMS sending limit reached/removed
Example: 24080#
ELDES
Cong-
uration
software
This operation may be carried out from the PC using the ELDES Conguration software.