8.10 Fault Memory menu
This shows the stored faults, from the most recent to the oldest.
Available for Master, User, Installer.
It is accessed through the Main Menu → FAULT MEM menu.
Use the ▼ and ▲ buttons to scroll through the various stored faults.
Each fault is displayed with a sequential number, the time and date it occurred (hh:mm and dd/mm) and
an abbreviated description (Short descry.).
Press the OK button to open the submenu to display the details of the fault memory.
On the first screen, there is the complete description of the fault (Long descr.), the indication of the sector
or physical address of the device affected by the fault (ind) and the custom description (Label).
Press the ESC button to go back to the fault memory list.
You can clear the entire stored fault list by pressing the OK button when "DELETE MEMORY?" message
appears on the display.
To Next Page
Loading...
