Elkron MEDEA - Wifi Connettivity Menu

MEDEA Programming Manual
131
8.31 WiFi Connectivity menu
This can be used to configure the WiFi connection.
If WIFI: is disabled, the other parameters do not appear.
If you enable CLIENT DHCP, IP, SUBNET MASK, GATEWAY, DNS PRIM. and DNS SECOND will not
appear.
See paragraph 4.4.2 WiFi Parameter for more details.
Available for Master, Installer.
It is accessed through the Main Menu → CONNECTIVITY → CONNECTIVITY WIFI menu.
WIFI
ON
SSID (NETW.NAME)
PASSWORD
GATEWAY
192.168.1.1
SUBNET MASK
255.255.255.0
IP
192.168.1.10
DHCP
OFF
DNS PRIM.
8.8.8.8
DNS SECOND.
8.8.4.4
Press OK to enter the value.
▼ ▲
Press OK to enter the value.
This appear only if DHCP is disabled.
▼ ▲
▼ ▲
▼ ▲
▼ ▲
▼ ▲
▼ ▲
▼ ▲
Change the parameter with the ► and ◄ buttons.
Press OK to enter the value.
This appear only if DHCP is disabled.
Press OK to enter the value.
This appear only if DHCP is disabled.
Press OK to enter the value.
This appear only if DHCP is disabled.
Press OK to enter the value.
This appear only if DHCP is disabled.
Press OK to enter the value.
Press OK to enter the value.