Elkron MEDEA - Scenario Control; Termoregolazione

MEDEA Programming Manual
47
4.7.7 Scenario control
This can be used to enable and disable the devices for the control of the ZigBee scenarios.
It is accessed through the CONFIGURATION → Zigbee Peripherals menu.
Figure 40 – ZigBee scenario controls
The available parameters and functions are the same as those of the photo sensors (paragraph 4.7.1), to
which you can refer for descriptions.
4.7.8 Thermoregulation
This can be used to enable and disable temperature control devices, (timer-thermostats or thermostatic
valves).
It is accessed through the CONFIGURATION → Zigbee Peripherals menu
Figure 41– Heat adjustment
The available parameters and functions are the same as those of the photo sensors (paragraph 4.7.1), to
which you can refer for descriptions.