8.11 Event Log menu
This shows the stored events, from the most recent to the oldest.
Available for Master, User, Installer when the system is not armed.
It is accessed through the Main Menu → EVENT LOG menu.
Use the ▼ and ▲ buttons to scroll through the various stored events.
Each event is displayed with a sequential number, the time and date it occurred (hh:mm and dd/mm) and
an abbreviated description (Short Descr.).
Press the OK button to open the submenu to display the details of the event. Use the ▼ and ▲ buttons to
scroll through the various submenu screens.
On the first screen, there is the complete description of the fault (Long Descr.), the indication of the possible
sector or physical address of the device affected by the event (ind) and the custom description (Label).
The second screen shows the concerned sector and the third screen shows the sector or physical address
of the device affected by the event (ind) and the custom description (Label).
Press the ESC button to go back to the event list.
You can clear the entire event list by pressing the OK button when "DELETE MEMORY?" message
appears on the display.
To Next Page
Loading...
Need help?
General