Emulex Fibre Channel - Nvram; Probe-Scsi-All; Show-Devs; Topology

Boot for the Fibre Channel Protocol User Manual P010096-02A Rev. A
5. OpenBoot
Attribute Commands
48
.nvram
probe-scsi-all
show-devs
.topology
Syntax
..nvram
Description Shows the current flags for OpenBoot.
show-devs
"/pci@1f,0/pci@1/lpfc@1" select-dev
/* select lpfc@1 (for example) */
.nvram
Parameters None
Syntax
.probe-scsi-all
Description Shows the current SCSI and FC devices.
Parameters None
Syntax
.show-devs
Description Shows a list of the devices found.
Parameters None
Syntax
..topology
Description Shows the current topology.
Parameters None