Emulex Fibre Channel - Figure 7-6 Discovered Targets Screen; Figure 7-7 Boot Device Screen

Boot for the Fibre Channel Protocol User Manual P010096-02A Rev. A
7. Configure EFIBoot via UEFI HII (Human Interface Infrastructure) in a UEFI 2.1 System
Add Boot Devices
88
2. From the Main menu, select Add Boot Device and press <Enter>. A screen appears
displaying the discovered targets.
Figure 7-6 Discovered Targets Screen
3. Select the target you want and press <Enter>. A list of bootable LUNS is displayed.
Figure 7-7 Boot Device Screen