Emulex Fibre Channel User Manual

Boot for the Fibre Channel Protocol User Manual P010096-02A Rev. A
7. Configure EFIBoot via UEFI HII (Human Interface Infrastructure) in a UEFI 2.1 System
Change Boot Device Order
91
Note: This screen is different for LPe16000 adapters, but the functionality is the same.
4. Select Commit Changes and press <Enter>.
Change Boot Device Order
To change boot device order:
1. From the Adapter Selection screen, select the adapter whose boot device order you
want to change and press <Enter>.
2. From the Main menu, select Change Boot Device Order and press <Enter>. A
screen displaying the discovered targets appears.
Figure 7-11 Discovered Targets Screen

Emulex Fibre Channel Specifications

General

Interface Type	Fibre Channel
RAID Support	No
Boot Support	Yes
Data Transfer Rate	32Gbps
Interface	PCIe
Operating Systems Supported	Windows, Linux, VMware
Ports	Single, Dual, or Quad