Endress+Hauser Proline Prosonic Flow 93 - Page 121

PROline Prosonic Flow 93 FOUNDATION Fieldbus 3 Transducer Blocks (transmission blocks)
Endress+Hauser 121
Liquid Data -
Temperature
AUTO - OOS Entry of the liquid temperature.
User input:
Fixed-point number -273.15...726.85 °C (0...1000 K)
Factory setting:
20
 Note!
The unit used is displayed in the “Liquid Data - Unit Temperature”
parameter.
Liquid Data -
Unit Temperature
read only Displays the unit for the liquid temperature selected in the “Liquid
Data - Temperature” parameter.
 Note!
The unit is selected in the “System Unit - Temperature” parameter,
see Page 111.
Liquid Data -
Sound Velocity
Liquid
AUTO - OOS Entry of the sound velocity of the liquid.
Measuring the sound velocity of the liquid
Measurement can be carried out via:
• The local display (“Sensor” Quick Setup), see Page 19.
• The configuration and service software FieldTool.
User input:
Fixed-point number 400...3000
Factory setting:
1487
 Note!
The unit used is displayed in the “Liquid Data - Unit Sound
Velocity Liquid” parameter.
Liquid Data -
Unit Sound
Velocity Liquid
read only Displays the unit for the liquid sound velocity selected in the
“Liquid Data - Sound Velocity Liquid” parameter.
 Note!
The unit is selected in the “System Unit - Sound Velocity”
parameter, see Page 111.
Liquid Data -
Min. Sound
Velocity Liquid
AUTO - OOS Entry of the minimum sound velocity of the liquid.
User input:
Fixed-point number 400...3000
Factory setting:
800
 Note!
The unit used is displayed in the “Liquid Data - Unit Min. Sound
Velocity Liquid” parameter.
“TRANSDUCER_CH1” and “TRANSDUCER_CH2” (E+H parameters) /
Base index 1200 and 1300
Parameter Write access
with operating
mode
(MODE_BLK)
Description