Endress+Hauser Proline Prowirl R 200 - Input Values; Output Values

Operation Proline Prowirl R 200 HART
140 Endress+Hauser
Parameter overview with brief description
Parameter Prerequisite Description User interface
Totalizer value 1 to n One of the following options is selected
in the Assign process variable
parameter (→  114) of the Totalizer
1 to n submenu:
• Volume flow
• Corrected volume flow
• Mass flow
• Total mass flow
*
• Condensate mass flow
*
• Energy flow
*
• Heat flow difference
*
Displays the current totalizer counter
value.
Signed floating-point
number
Totalizer overflow 1 to n One of the following options is selected
in the Assign process variable
parameter (→  114) of the Totalizer
1 to n submenu:
• Volume flow
• Corrected volume flow
• Mass flow
• Total mass flow
*
• Condensate mass flow
*
• Energy flow
*
• Heat flow difference
*
Displays the current totalizer overflow. Integer with sign
* Visibility depends on order options or device settings
11.4.3 Input values
The Input values submenu guides you systematically to the individual input values.
The submenu appears only if the device was ordered with a current input.
Navigation
"Diagnostics" menu → Measured values → Input values
‣
Input values
Measured current 1
→  140
Measured values 1
→  140
Parameter overview with brief description
Parameter Description User interface
Measured current 1 Displays the current value of the current input. 3.59 to 22.5 mA
Measured values 1 Displays the current input value.
Dependency
The display depends on the option selected in the External
value parameter.
Signed floating-point number
11.4.4 Output values
The Output values submenu contains all the parameters needed to display the current
measured values for every output.